Patrol Cap (or any other) Modification For Night Time Ops

13 July, 2014

100_0123

Students ask me all the time, “How do we see the guy in front of us on a really dark patrol?”. My answer is first and foremost that the situational variables (terrain and illumination, etc.) dictate your spacing and formation (tight ranger file, 5-10 mtr spread wedge etc.). Using your training and experience (you’re practicing movement at night, right?)  and applying 2 of the most important principles in the 5 principles of patrolling, CONTROL and COMMON SENSE, will get you through a patrol without losing anyone, or getting lost yourself.

You should always plan on the lowest common denominator when it comes to reliance on equipment. Night vision and Thermal viewers are great, but will let you down when needed the most (Damn Murphy again), and if you’re gonna plan on using visual aides, using something that doesn’t required batteries or a certain level of illumination, makes the most sense from a practical aspect. When I first joined the military, I was given some “cat eye” tape, and an extra name tape, and told to get out the sewing kit, and make my PC look like everybody else’s.

100_0126

“Cat eyes” are an awesome aide when you’re following the team member in front of you in a deep, dark swamp, where the illumination is measured in lightning bugs per hour (LBPH). Any grunt that has done any time in the field will tell you they are a great aide to keeping track of the guy in front, and still being able to maintain a safer interval (spacing out, not bunching up) than you would be able to without them to see. Yes, I understand that they stand out like a sore thumb to NOD’s (night vision), but not everybody, even on the modern battlefield, has NOD’s, so get over yourself, with the “Tacticool” what if’s, and think of it as a tool in the tool box that can be used….or not. My modification places “cat eyes” on one side of a velcro patch, and a 1″x1″ IR (Infra-Red) reflective tab on the other side, so if everyone has NOD’s, use the IR, but if most on the team does not, use the “cat eyes”. The best part about this is that you can completely remove it if you think you’ll be compromised with it in place. Just so you know, this is an adaptation of an idea from an old Team SGT I know, who had “cat eyes” on a piece of cloth, that he could safety pin in place for use.

Start with materials needed:

Luminous “Cat eye” tape. roll is an inch wide, cut two pieces that are 1/2″ wide, and an inch tall. You can also cut them off of an old helmet band if you have a spare around.

100_0128

Earth tone velcro, both sides (Hook-rough side, loop-soft side) that come on a velcro flag will work for this project. Soft side piece measure 1 1/2″x2″, rough side measures 2″x3″

100_0131

You will need an IR reflective tab, whether you cut it off of ACU’s, or order one through the mail is up to you.

100_0127

Position  the soft (Loop) side where you want it on the back of your PC (patrol cap), and sew in place.

100_0125

Next, take your rough (Hook) side and either cut in half (stays flatter) or fold a crease in the middle, so it measures 1″x2″. The object of this is to have a hook side velcro surface on both sides.

100_0129

Next, you will sew the “cat eyes” on to one half (or piece) of the hook side velco, and sew the IR tab on to the other side. (note: do not remove the backing from the “cat eye” tape, it will tear very easily when you’re trying to sew it!)

100_0132

After attachment of the “cat eyes”, and the IR tab, finish by sewing the two pieces or sides together. When you’re finished it will look like this with the “cat eye” side out

100_0123

And this with the IR tab side out

100_0124

This just a simple modification of someone else’s idea. You can leave it off (sew soft side velcro inside cap to store it), you can use the “cat eyes”, or you can use the IR tab. What this gives you is options based on your tactical situation and needs, and having options makes things easier when making plans, and conducting operations.

100_0138

JCD

American by BIRTH, Infidel by CHOICE

 

 

 

 

Advertisements

6 thoughts on “Patrol Cap (or any other) Modification For Night Time Ops

  1. You beat me to it, but I have a design scribbled out that I was gonna make a product for when I got back to Fairbanks. Guess I’ll have to step it up and make it down here now. Mine is for a less permanent set that would work with current army pc’s with velcro name tapes.

  2. Pingback: JC Dodge: Patrol Cap (or any other) Modification For Night Time Ops | Western Rifle Shooters Association

  3. We would also use the tape on the inside frame of our rucks. Each squad would have a different insignia like 1st squad having one stripe, 2nd squad: two stripes etc. On a designated stripe, we wrote our last name. That way at night, in an ORP for example, you could easily make sure you were at least grabbing a ruck from your own squad, and could sort them out to the individual owners once the unit had exfilled at least a couple major terrain features away.

    • Yup, you can even use a sharpie and put names or instructions on the “cat eye” tape, then cover that with clear tape (keep ink from getting rubbed off). This way, you can read it in the dark.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s